Motimac WT RRHG1300,
Segment Pad Sanding Machine
The Motimac WT RRHG1300 Segmented Pad Sanding Machine from NichoMachines is a combination wide-belt and segment pad sanding machine, pairing two roller sanding stations with a segmented pad and Chevron belt station in a single pass. The two roller groups handle initial calibration and surface leveling, while the segment pad group finishes with the same flexible, contour-following sanding used on Motimac’s pure pad machines — giving you rough-to-fine sanding in one line rather than switching machines between stages.
Key advantages of the Motimac WT Segment Pad Sanding Machine
- Three-stage sanding in one pass: two roller groups plus a segmented pad/Chevron belt group
- Segmented pad — 80 pads, 16mm each, for smaller-pad accuracy on the finishing stage
- Working thickness range 3–150mm and conveyor speed 5–26 m/min for flexible batch sizes
- Automatic panel and sandpaper cleaning built in, no separate cleaning process needed
- Safety automatic board — machine shuts down automatically on hand entry
- 3-year warranty as standard
Machine Design and Construction
- Two roller groups (240mm, eccentric rubber) plus segmented pad/Chevron group
- Double chains, military-grade manufacturer
- Helical gear reducer for higher torque efficiency
- German Optibelt Poly V-belt drive
- Adjustable pressure roller with rectangular springIron pallet packaging for sea freight
Operation and Control System
- Italian control system, 50+ years in the European market
- High-speed data calculation, detects panel position for key drop timing
- Unlimited formula storage, recall any recipe
- Siemens/ABB electrical as standard
- 400+ point digital scanning for contour detection
- MBS closed-loop lifting system, 25x standard accuracy, 0.01mm display
Advanced Features
- Adjustable graphite pad height
- Adjustable belt tension control
- AirTac pneumatic system
- German FAG bearings, 5 years maintenance-free
- Powered brush roller cleans conveyor belt
- Rotative air blower cleans panel at outfeed
- Fan-shaped air jet cleans sandpaperInternal dust hood reduces dispersion
- 4-second brake stop
- Outfeed inspection lamp for quality checks
Motimac WT RRHG1300,
Segment Pad Sanding Machine
Selected Standard Equipment and Features:
- Working width: 1,300 mm
- Min. working length: 490 mm
- Working thickness: 3–150 mm
- Conveyor speed: 5–26 m/min
- Motor 1st group: 18.5 kW inverter
- Motor 2nd group: 15 kW inverter
- Motor 3rd group: 15 kW inverter
- Conveyor motor: 4 kW
- Lifting motor: 0.55 kW
- Roller diameter: 240 mm (1st & 2nd group)
- Sandpaper size: 1,350 × 2,620 mm
- Chevron belt size: 1,350 × 2,190 mm
- Working pressure: 0.6 MPa
- Compressed air: 140 m³/h
- Vacuum motor: 7.5 kW
- Work table height: 900 mm
- Voltage: 380V / 50Hz / 3-phase
- 3-year warranty
