Motimac WT RR1300V,
Standard Lacquer Sanding Machine
The Motimac WT RR1300V Standard Lacquer Sanding Machine from NichoMachines is a two-roller wide-belt sanding machine with two identical 240mm rollers (26HA), both fixed on a stationary table. It’s a straightforward calibration-and-finish roller sander, with a built-in ball screw lifting system, double-row chain positioning, and a full set of belt-monitoring safety devices — automatic stop on belt breakage, loss of tension, lateral displacement, or overload.
A more compact, lower-power configuration within the WT platform, suited to standard panel sanding rather than fine finishing.
Key advantages of the Motimac WT Standard Lacquer Sanding Machine
- Two-roller sanding, 240mm rollers front and back
- 1,300mm working width, 3–150mm working thickness
- 5–30 m/min feeding speed
- Automatic belt centering and oscillation control
- Full automatic emergency stop coverage
- CE standard
- 3-year warranty
Machine Design and Construction
- New-type sanding unit structure for stability
- Ball-screw lifting system, 10x more accurate positioning than an ordinary screw
- Double-row chain, minimizing lifting deviation and extending lifetime 3x
- German FAG maintenance-free bearings for dynamic balance, no vibration
- German Siegling conveyor belt, 3x higher friction than an ordinary belt, no warping or deformation
- Rubber press roller
- Front brake baffle and non-independent suspension for over-thickness protectionIron pallet packing
Operation and Control System
- Siemens safety lock power switch handle
- 10-inch touch screen control
- Siemens/ABB low-voltage electrical parts
- Automatic star-delta start on the main motor
- Overload protection and IP54 protection on the motors
- Powered adjustment of working thickness
Advanced Features
- Japanese Omron switch — stops the machine on belt breakage or loss of tensionBrush roller for a dust-free board surface into the next process
- Air jet cleaning of the sanding belts with dust-collecting hood
- Automatic belt oscillation adjustment, prolonging belt life and improving surface finish
- Automatic belt adjustment, preventing the belt from running off due to conical shape
- AIRTAC pneumatic system with maintenance-free cylinder, magnetic valve, and Taiwan-sourced fittings
- Air pressure protection device against sanding defects from low pressure
- Automatic emergency stop for belt breaking, loss of tension, lateral displacement, loss of compressed air, or main motor overload
- Safety detection for over-thickness workpieces, automatic brake, front/rear emergency pushbuttons, padlockable main switch
Motimac WT RR1300V
Surface/Calibration Sanding Machine
Selected Standard Equipment and Features:
- Working width: 1,300 mm
- Min. working length: 300 mm
- Working thickness: 3–150 mm
- Feeding speed: 5–30 m/min
- Total power: 36 kWFeeding motor: 3.0 kW
- Lifting motor: 0.55 kW
- Brush roller motor: 1.5 kW
- Vacuum motor: 0.37 kW (optional)
- First roller: φ240mm, 26HA, 15 kW
- Second roller: φ240mm, 26HA, 15 kW
- Abrasive belt size: 1,330 × 2,620 mm
- Working air pressure: 0.6 MPa
- Dust collection volume: 11,000 m³/h
- Overall dimensions: 2,235 × 2,700 × 2,450–2,600 mm
- Worktable height: 900 mm (fixed table)
- Net weight: 4,600 kg
- Vacuum table: optional
- CE standard
- 3-year warranty
